Yamaha RX-A1030 El manual del propietario Pagina 105
- Pagina / 154
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 105
❑ Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
• This setting is not available when “Subwoofer” is set to “None”, or when “Front” is set to “Small”.
❑ Bass Cross Over
Sets the lower limit of the low-frequency components that can be output from a speaker
whose size is set to “Small”. A frequency sound lower than the specified value will be
produced from the subwoofer or front speakers.
Settings
40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
■ Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
Default
3.00 m (10.0 ft)
■ Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
0.0 dB
■ Parametric EQ
Adjusts the tone with an equalizer.
Settings
• “YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto
Setup” have already been saved (p.41). Press ENTER again to view the measurement results.
■ Manual equalizer adjustment
1
Set “Parametric EQ” to “Manual” and press ENTER.
2
Press ENTER again to enter the edit screen.
3
Use the cursor keys to select a speaker and press ENTER.
• To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.
• To copy the parametric equalizer values acquired with “Auto Setup” (p.41) to the “Manual” fields for
fine adjustment, select “PEQ Data Copy” and then an equalizer type.
Off (default)
Depending on the size of the front speakers, either the subwoofer or
front speakers produce the front channel low-frequency components.
On
Both the front speakers and subwoofer produce the front channel
low-frequency components.
Manual
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
YPAO:Front
Adjusts individual speakers to achieve the same characteristics as
the front speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through Does not use the equalizer.
- Owner’s Manual 1
- CONTENTS 2
- CONFIGURATIONS 92 3
- APPENDIX 129 4
- Accessories 5
- FEATURES 6
- Full of useful functions! 7
- Useful tips 7
- Part names and functions 8
- 9 A C D H I KE J LB0 9
- Front display (indicators) 10
- Rear panel 11
- H K LGF I J 12
- Remote control 13
- PREPARATIONS 14
- 1 Connecting speakers 15
- Basic speaker configuration 16
- 8MIN 18
- SPEAKERIMP 18
- The unit (rear) 19
- – (black) 19
- Banana plug 19
- Audio pin cable 19
- 2 3 4 5 6 7 8 9 20
- Speaker connections 21
- ■ Connecting Zone2 speakers 23
- 12V 0.1A 24
- Input/output jacks and cables 25
- 2 Connecting a TV 26
- ❑ Necessary settings 27
- 3 4 5 6 7 8 9 27
- TV connection 28
- HDMI OUT 29
- ■ HDMI connection 31
- ■ S-video connection 32
- ■ Component video connection 32
- ■ Composite video connection 33
- MULTI ZONE 34
- VIDEO AUX 34
- ❑ MHL connection 35
- 4 5 6 7 8 9 35
- NETWORKDC OUT 36
- Connecting recording devices 37
- 7 Connecting the power cable 39
- 1 2 3 4 5 6 7 8 40
- (default) 41
- 1 2 3 4 5 6 7 8 9 42
- Error messages 47
- Warning messages 48
- PLAYBACK 49
- Press SCENE 50
- SETComplete 51
- SCENE1 51
- Cursor keys 52
- (CINEMA DSP 3D) 53
- (SILENT CINEMA) 53
- ❑ MOVIE THEATER 54
- ❑ ENTERTAINMENT 54
- ❑ CLASSICAL 55
- ❑ LIVE/CLUB 55
- ❑ STEREO 55
- STRAIGHT 56
- ProLogic 56
- SUR.DECODE 56
- PUREDIRECT 57
- EnhancerOn 57
- FM50/AM9 58
- TUNERFRQSTEP 58
- FM87.50MHz 58
- FM98.50MHz 58
- PresetOK 59
- 01:FM98.50MHz 59
- 02:Empty 59
- FM88.9-1 60
- ❑ Playback screen 61
- ProgramType 62
- CLASSICS 62
- TPFM101.30MHz 63
- TrafficProgram 63
- ■ Browse screen 64
- Playing back iPod music 65
- ■ Playback screen 67
- (simple play) 67
- ■ Shuffle/repeat settings 68
- Connected 69
- USB 69
- ( ) appears 77
- Preparing Zone2 80
- COMPONENT VIDEO 81
- (ZONE OUT) 82
- (remote connection) 83
- MAIN/ZONE2 84
- RECEIVER z 84
- ■ Other operations for Zone2 85
- AudioDecoder 86
- AV1 86
- Option menu items 87
- ■ Tone Control (Tone Control) 88
- ■ Adaptive DRC (Adaptive DRC) 88
- ■ Volume Trim (Volume Trim) 89
- ■ Enhancer (Enhancer) 90
- ■ Video Mode (Video Mode) 90
- ■ Audio Select (Audio Select) 90
- ■ Audio Mode (Audio Mode) 90
- ■ FM Mode (FM Mode) 91
- CONFIGURATIONS 92
- ■ Rename/Icon Select 93
- ■ Decoder Mode 93
- ■ Volume Interlock 93
- ■ Video Out 93
- ■ DMC Control 94
- Scene menu items 95
- TV screen 97
- Sound Program menu items 98
- ■ Settings for decoders 99
- Setup menu items 101
- Speaker (Manual Setup) 103
- ■ Distance 105
- ■ Parametric EQ 105
- ■ Test Tone 106
- ■ Lipsync 106
- ■ Max Volume 107
- ■ Initial Volume 107
- ■ Pure Direct Mode 107
- ■ Adaptive DSP Level 107
- ■ Dynamic Range 107
- ■ Video Mode 108
- ■ HDMI Control 109
- ■ Audio Output 109
- ■ Standby Through 110
- ■ IP Address 110
- ■ Network Standby 111
- ■ MAC Address Filter 111
- ■ Network Name 111
- Multi Zone 112
- ■ Monitor Out Assign 113
- ■ HDMI OUT2 Assign 113
- ■ Party Mode Set 113
- Function 114
- ■ DC OUT 115
- ■ Memory Guard 116
- ■ Auto Power Standby 116
- (Information menu) 117
- Types of information 118
- (ADVANCED SETUP menu) 119
- ID1 120
- REMOTECONAMP 120
- YES 121
- MONITORCHECK 121
- BACKUP 121
- RECOV./BACKUP 121
- USB 122
- FIRMUPDATE 122
- x.xx 122
- VERSION 122
- ■ TV operations 123
- ■ Playback device operations 124
- 5 to 10 cm (2 to 4”) apart 125
- SOURCE blinks once 126
- Press CODE SET 127
- Information 128
- System Icon 128
- APPENDIX 129
- Troubleshooting 130
- FM/AM radio 134
- USB and network 135
- Glossary 137
- HDMI and video information 138
- Yamaha technologies 139
- Video signal flow 140
- Information on HDMI 141
- (Example) 142
- HDMI signal compatibility 143
- (U.S.A. model) 144
- Trademarks 145
- Specifications 146
- Compatible Decoding Formats 147
- Audio Section 147
- Video Section 148
- FM Section 148
- AM section 148
- APPENDIX ➤ Index En 149 149
- APPENDIX ➤ Index En 150 150
- APPENDIX ➤ Index En 151 151
- APPENDIX ➤ Index En 152 152
- APPENDIX ➤ Index En 153 153
Relacionado con productos y manuales para Receptores AV Yamaha RX-A1030
Receptores AV Yamaha DVR-S120 El manual del propietario
(114 paginas)
(114 paginas)
Receptores AV Yamaha DVX-S120 El manual del propietario
(114 paginas)
(114 paginas)
Receptores AV Yamaha HTR-6060 El manual del propietario
(127 paginas)
(127 paginas)
Receptores AV Yamaha RX-V1800 Manual de usuario
(2 paginas)
(2 paginas)
Receptores AV Yamaha HTR-5960 El manual del propietario
(128 paginas)
(128 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 1.457 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales