Yamaha V8 Guía de usuario descargar pdf (Pagina 9)

Yamaha Professional Audio QL StageMix V8 User Guide

Page 9

3.0 Getting Started

3.1 QL series Network Setup

Connect the Wi-Fi access point to the QL series console’s network port via a

CAT5 cable.

Make sure your Ethernet cable is connected to a LAN port on your Wi-Fi

device and not the WAN port.

Note the IP address of the QL series console - this will need to be entered into

the iPad later. It can be found in the console as follows:

a. Press the [SETUP] button on the QL series touchscreen

b. Press [NETWORK] on the QL series touchscreen

3.2 iPad Wi-Fi Settings

The iPad can be configured using either DHCP or a Static IP address.

3.2.1 Using DHCP

Dynamic Host Configuration Protocol (DHCP) is a network protocol that

enables a server to automatically assign an IP address to a device. It is

recommended to use DHCP. Use the following steps to configure your

iPad using DHCP.

a) Open the iPad “Settings” menu

b) Select “Wi-Fi”, and choose the correct Wi-Fi Access Point under

“CHOOSE A NETWORK…”

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 99 100

Sin comentarios

Yamaha V8 Guía de usuario Pagina 9