Yamaha YZF-R125 Manual de usuario

www.akrapovic.com*502642*Installation instructions Akrapovič Exhaust System:Racingfor theYAMAHA YZF-R125 2008-2010

22 Nm 16 ftlb4.9Nm 3.6ftlbwww.akrapovic.com10Reattach the stock right lower and upper parts of the cowling and tighten the marked stock bolts to a

11IT IS NORMAL IF WHITE SMOKE COMES OUT OF THE MUFFLER ON FIRST OPERATION.DO NOT STAND BEHIND THE MUFFLER ON FIRST OPERATION. DO NOT USE AUTOMOTIVE WH

YAMAHA YZF-R125/ Complete exhaust system/ Racing line/ OPEN / model year: 2008-2010 Product code: S-Y125R1-ZC S-Y125R1-ZTP-HF492 F

13

www.akrapovic.com

www.akrapovic.com2Congratulations on purchasing an Akrapovič exhaust system. Please read the entire installation manual prior to undertaking any activ

3CAUTION OR WARNINGINSTALLATION TIPTOOLS REQUIREDTIGHTENING TORQUESymbolsThe following symbols are used throughout these installation instructions:USE

www.akrapovic.com4Figure 1 Figure 21.2.Unscrew the marked bolts and remove the right lower part of the cowling (Figure 2). 3.Put the motorcycle on a s

5Figure 3Figure 44. Unscrew the two marked nuts, undo the marked clamp and pull the emission tube of the stock header pipe (Figure 3).5. Unscrew the

22 Nm 16 ftlbwww.akrapovic.com6Figure 5 Figure 66.Attach the Akrapovič distance bushes under the footrest as shown. Tighten the footrest bolts to a sp

7Figure 7Figure 83.Install the assembled sleeve, ange and springs onto the motorcycle and hand tighten the two marked stock nuts (Figure 8). WARNING:

22 Nm 16 ftlb22Nm 16ftlbwww.akrapovic.com8Figure 9Figure 104.5.Insert the header tube into the sleeve, attach the springs and tighten the nuts to a sp

9Figure 11Figure 12Correctly position the carbon-ber clamp and slide it onto the mufer - bear in mind the left offset of the carbon ber- clamp view