Yamaha PJP-EC200 Manual de usuario

PJP-EC200 Setup Procedure Yamaha Corporation

PJP-EC200 Setup Procedure 10 4. Connect CONFERENCE OUT to the microphone input jack of your PC. 5. Connect the AC adapter to DC IN. 6. Connect t

PJP-EC200 Setup Procedure 11 10. Turn on this unit. 11. Adjust the microphone gain of this unit. 1) Adjust MIC/LINE IN1. i. While talking into

PJP-EC200 Setup Procedure 12 voice. 6) While sounds are reproduced from the speakers, check that the CLIP LED (red) of MIC/LINE INPUT does not turn

PJP-EC200 Setup Procedure 13 learning). * During the measurement, the microphone picks up test tones output from the speakers. To achieve the best re

PJP-EC200 Setup Procedure 14 4. Configure the noise reduction settings. 1) To transmit any sounds (voice, environmental sounds, etc.) to the other

PJP-EC200 Setup Procedure 2 Contents Components ...

PJP-EC200 Setup Procedure 3 Components This document explains how to create a webconference environment consisting of the following components.

PJP-EC200 Setup Procedure 4 When Not Using the Public -Address System Follow the procedure below to output the talker’s voice (on your side) only fr

PJP-EC200 Setup Procedure 5 7. Connect the power cable to an AC outlet. 8. Configure the DIP switch settings. 1) Set the DIP switch ⑥ (SETT

PJP-EC200 Setup Procedure 6 selected as “Default device” in the audio property settings of your PC. 2) Make sure the external device connected

PJP-EC200 Setup Procedure 7 i. Talk into the microphone and then record your voice using a sound recorder on your PC. ii. Play back th

PJP-EC200 Setup Procedure 8 2. Adjust the echo canceller settings. 1) Ask the other end to check that echoes are not generated after he/she talks.

PJP-EC200 Setup Procedure 9 When Using the Public -Address System Follow the procedure below to output the talker’s voice (on your side)