
62 CVP-701 Reference Manual
Song Recording via MIDI – Recording Your Performance via MIDI –
5
3 MIX
This function lets you mix the data of two channels and place the results in a different channel. It also lets
you copy the data from one channel to another.
4 CHANNEL TRANSPOSE
This allows you to transpose the recorded data of individual channels up or down by a maximum of two
octaves in semitone increments.
NOTE Make sure not to transpose channels 9 and 10. In general, Drum kits are assigned to these channels. If you transpose the channels of Drum kits, the
instruments assigned to each key will be changed.
[2]/
[3]
SOURCE 1 Determines the MIDI channel (1 – 16) to be mixed. All MIDI events of
the channel specified here are copied to the destination channel.
[4]/
[5]
SOURCE 2 Determines the MIDI channel (1 – 16) to be mixed. Only note events of
the channel specified here are copied to the destination channel. Besides
the values 1 – 16, there is a “COPY” setting that allows you to copy the
data from Source 1 to the destination channel.
[6]/
[7]
DESTINATION Determines the channel into which the mix or copy results will be placed.
[F]
CH 1–8/CH 9–16
Toggles between the two channel displays: Channels 1–8, and Channels 9–16.
[G] ALL CH To simultaneously set all channels to the same value, adjust the Channel
Transpose for one of the channels while holding down this button.
Comentarios a estos manuales