Yamaha DM2000 Manual de usuario

EOwner’s ManualOwner’s ManualKeep This Manual For Future Reference.Keep This Manual For Future Reference.

10 Contents DM2000 Version 2—Owner’s Manual Contents 1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Control Surfac

100 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s ManualSelected Channel Surround Edit PageSurround pan settings can be viewed and set on the Input

Assigning Surround Channels to Buses 101DM2000 Version 2—Owner’s ManualDIV (divergence): This determines how the Center signal is fed to the Left, Rig

102 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s ManualSending Input Channels to Aux SendsInput Channel signals can be sent to Aux Sends 1–12. See

Using the MS Stereo Microphone 103DM2000 Version 2—Owner’s ManualUsing the MS Stereo MicrophoneThe MS system is a type of stereo recording that uses t

104 Chapter 8—Stereo OutDM2000 Version 2—Owner’s Manual8 Stereo OutStereo Out ConnectorsThe Stereo Out is output by the STEREO OUT +4 dB (BAL) balanc

Compressing the Stereo Out 105DM2000 Version 2—Owner’s ManualCompressing the Stereo OutSignal dynamics can be controlled by using the Stereo Out Compr

106 Chapter 8—Stereo OutDM2000 Version 2—Owner’s ManualBalancing the Stereo OutThe left and right channels of the Stereo Out can be balanced as follow

Bus Outs 107DM2000 Version 2—Owner’s Manual9 Bus OutsPatching Bus Outs to OutputsBus Outs can be patched to the Slot Outputs, Omni Outs, or the 2TR D

108 Chapter 9—Bus OutsDM2000 Version 2—Owner’s ManualMuting Bus Outs (ON/OFF)Bus Outs can be muted by using the channel strip [ON] buttons.1 Press the

Sending Bus Outs to the Stereo Out 109DM2000 Version 2—Owner’s ManualSending Bus Outs to the Stereo OutBus Outs can be routed to the Stereo Out buses

Contents 11 DM2000 Version 2—Owner’s Manual 7 Input Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Patching Input Channels .

110 Chapter 10—Aux SendsDM2000 Version 2—Owner’s Manual10 Aux SendsPatching Aux Send Masters to OutputsAux Send Masters can be patched to the Slot Ou

Pre-Fader or Post-Fader Aux Sends 111DM2000 Version 2—Owner’s ManualPre-Fader or Post-Fader Aux SendsAux Sends can be configured individually as either

112 Chapter 10—Aux SendsDM2000 Version 2—Owner’s ManualMuting Aux Sends (ON/OFF)1 Use the LAYER buttons to select the Input Channel Layers, and use th

Aux Send Pages 113DM2000 Version 2—Owner’s Manual6 To set the Pre Fader and Post Fader parameters, select the PRE/POST but-tons, then use the [ENTER]

114 Chapter 10—Aux SendsDM2000 Version 2—Owner’s ManualViewing Aux Send SettingsYou can view and set settings of all Aux Sends on the Aux View pages.

Viewing Aux Send Settings 115DM2000 Version 2—Owner’s ManualPre/Post ParametersIn Pre/Post mode, the Aux View pages display Aux Send Pre/Post paramete

116 Chapter 10—Aux SendsDM2000 Version 2—Owner’s ManualPanning Aux SendsWhen Aux Sends are paired, Aux Sends can be panned between the paired Aux buse

Excluding Certain Channels from Aux Sends (Mix Minus) 117DM2000 Version 2—Owner’s ManualExcluding Certain Channels from Aux Sends (Mix Minus)You can q

118 Chapter 10—Aux SendsDM2000 Version 2—Owner’s ManualCopying Channel Fader Positions to Aux SendsWhile Aux Sends are in Variable mode, you can copy

Aux Send Master Inserts 119DM2000 Version 2—Owner’s ManualAux Send Master InsertsInternal effects processors and external signal processors can be pat

12 Contents DM2000 Version 2—Owner’s Manual 9 Bus Outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Patching Bus Outs to Ou

120 Chapter 10—Aux SendsDM2000 Version 2—Owner’s ManualInserting GEQsInternal GEQs can be inserted into the Aux Send Masters. See “About the GEQs” on

Matrix Sends 121DM2000 Version 2—Owner’s Manual11 Matrix SendsPatching Matrix Send Masters to OutputsThe left and right channels of the Matrix Send M

122 Chapter 11—Matrix SendsDM2000 Version 2—Owner’s ManualUsing the EncodersStereo Out Matrix Sends cannot be set using the Encoders.1 Press the LAYER

Panning Matrix Sends 123DM2000 Version 2—Owner’s Manual4 To turn Matrix Sends on and off, select the rotary controls, and press [ENTER].The rotary con

124 Chapter 11—Matrix SendsDM2000 Version 2—Owner’s ManualViewing Matrix Send SettingsYou can view and set the Matrix Send Level and On/Off parameters

Attenuating Matrix Send Masters 125DM2000 Version 2—Owner’s ManualAttenuating Matrix Send MastersMatrix Send Master signals can be attenuated pre-EQ.

126 Chapter 11—Matrix SendsDM2000 Version 2—Owner’s ManualGrouping Master FadersMatrix Send Master faders can be grouped with the faders of other Outp

Common Channel Functions 127DM2000 Version 2—Owner’s Manual12 Common Channel FunctionsMeteringInput Channels, Bus Outs, Aux Sends, Matrix Sends, the

128 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualMetering Input ChannelsThere are two types of Input Channel Meter page: 24-chann

Metering 129DM2000 Version 2—Owner’s ManualMetering Output ChannelsBus Outs, Aux Sends, Matrix Sends, and the Stereo Out can all be metered on the Mas

Contents 13 DM2000 Version 2—Owner’s Manual 11 Matrix Sends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Patching Matrix Send Mast

130 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualMetering the Stereo outThe Stereo Out can be metered on the Stereo Meter page. P

Using EQ 131DM2000 Version 2—Owner’s ManualThe attenuator parameters for the Output Channels appear on the Output Attenuator page.2 Use the cursor but

132 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualPreset EQsThe following table lists the preset EQs. See page 332 for detailed pa

Using EQ 133DM2000 Version 2—Owner’s ManualUsing the SELECTED CHANNEL EQUALIZER Controls1 Use the LAYER buttons to select Layers, and use the [SEL] bu

134 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualEQ Edit PagesEQ parameters can also be set on the EQ Edit page. If the Auto EQUA

Grouping Output Channel EQs 135DM2000 Version 2—Owner’s ManualGrouping Output Channel EQsThe Bus Out, Aux Send, Matrix Send, and Stereo Out EQs can be

136 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualInsert PagesInserts can be configured on the Insert page. If the Auto PHASE/INSER

Compressing Channels 137DM2000 Version 2—Owner’s ManualSelect window (see page 83), which is accessed by pressing [ENTER] while this parameter is sele

138 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s Manual11 A. Dr. OverTop COMPAND-SSoft-kneed compander for emphasizing the attack and a

Compressing Channels 139DM2000 Version 2—Owner’s ManualUsing the SELECTED CHANNEL DYNAMICS Controls1 Use the LAYER buttons to select Layers, and use t

14 Contents DM2000 Version 2—Owner’s Manual 14 Libraries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 About the Libraries

140 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualCURVE: This displays the Compressor curve (i.e., input level vs. output level).T

Delaying Channel Signals 141DM2000 Version 2—Owner’s ManualDelaying Channel SignalsInput Channels, Bus Outs, Aux Sends, Matrix Sends, and the Stereo O

142 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualThe Delay parameters for the Bus Outs, Aux Sends, Matrix Sends, and the Stereo O

Soloing Channels 143 DM2000 Version 2—Owner’s Manual Configuring Solo The Solo function is configured on the Solo Setup page. If the Auto SOLO Display p

144 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualFADER/SOLO RELEASE: When you check this check box, raising the channel faders of

Pairing Channels 145DM2000 Version 2—Owner’s ManualPairing Channels by Using the Pair PagesBoth horizontal and vertical pairing can be set on the Pair

146 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s Manual3 Use the cursor buttons or Parameter wheel to select the channel pair but-tons,

Group Master for the Output Channel Faders 147DM2000 Version 2—Owner’s Manual2 Press the LAYER [MASTER] button.3 Use the Up/Down cursor buttons to sel

148 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualYou can also make these settings in the Output Fader Group Master page, as shown

Grouping Output Channel Mutes (ON/OFF) 149DM2000 Version 2—Owner’s ManualGrouping Output Channel Mutes (ON/OFF)The Bus Out, Aux Send, Matrix Send, and

Contents 15DM2000 Version 2—Owner’s Manual18 MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215MIDI & the DM2000 .

150 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualViewing Channel Parameter SettingsThe parameter setting of the currently selecte

Viewing Channel Fader Settings 151DM2000 Version 2—Owner’s ManualOutput ChannelsThis is the Parameter View page for the Bus Outs, Aux Sends, Matrix Se

152 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualFader: This indicates the fader position of the currently selected Input Channel

Viewing Channel Fader Settings 153DM2000 Version 2—Owner’s ManualAux SendsBelow is the Fader View page for the Aux Sends.ON/OFF: This is the On/Off pa

154 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualFader: This indicates the fader position of the currently selected Matrix Send.

Copying Channel Settings 155DM2000 Version 2—Owner’s ManualCopying Channel SettingsThe settings of Input Channels, Bus Outs, Aux Sends, Matrix Sends,

156 Chapter 12—Common Channel FunctionsDM2000 Version 2—Owner’s ManualCopying Channel Settings Between Noncurrent Scenes1 Use the SCENE MEMORY Up [ ]

Naming Channels 157DM2000 Version 2—Owner’s ManualIf the Name Input Auto Copy check box in the upper right corner is checked, the first four characters

158 Chapter 13—Monitoring & TalkbackDM2000 Version 2—Owner’s Manual13 Monitoring & TalkbackControl Room MonitoringThe DM2000 features indepen

Studio Monitoring 159DM2000 Version 2—Owner’s ManualControl Room SetupControl room monitoring is configured on the Control Room Setup page.1 Use the MO

16 ContentsDM2000 Version 2—Owner’s ManualOperation Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

160 Chapter 13—Monitoring & TalkbackDM2000 Version 2—Owner’s ManualSurround MonitoringThe DM2000 features comprehensive surround monitoring functi

Surround Monitoring 161DM2000 Version 2—Owner’s ManualWhen the MONITOR L/R to C-R button is on, the Left and Right Surround Monitor Chan-nels are fed

162 Chapter 13—Monitoring & TalkbackDM2000 Version 2—Owner’s ManualThe following screen shows an example in 6.1 Surround mode and 3-1 Monitor Matr

Using Talkback & Slate 163DM2000 Version 2—Owner’s ManualMONITOR ALIGNMENT ATT & DLY ON/OFF: These buttons are used to turn on and off the Mon

164 Chapter 13—Monitoring & TalkbackDM2000 Version 2—Owner’s ManualThe Slate function distributes the Talkback mic signal to all Bus Outs, Matrix

Libraries 165DM2000 Version 2—Owner’s Manual14 LibrariesAbout the LibrariesThe DM2000 features 11 libraries for storing Automix, Effects, Channel, In

166 Chapter 14—LibrariesDM2000 Version 2—Owner’s ManualMemory #U is a special read-only memory that allows you to undo and redo memory recall and stor

Input Patch Library 167DM2000 Version 2—Owner’s ManualInput Patch LibraryInput Patch settings can be stored in the Input Patch library, which contains

168 Chapter 14—LibrariesDM2000 Version 2—Owner’s ManualGEQ LibraryGEQ (Graphic Equalizer) settings can be stored in the GEQ library, which contains 1

Bus to Stereo Library 169DM2000 Version 2—Owner’s Manual2 Press the EFFECTS/PLUG-INS [INTERNAL EFFECTS] button, and use the EFFECTS/PLUG-INS [1–8] but

Welcome 17DM2000 Version 2—Owner’s Manual1 WelcomeThank you for choosing the Yamaha DM2000 Digital Production Console.Designed with production in min

170 Chapter 14—LibrariesDM2000 Version 2—Owner’s ManualGate LibraryInput Channel Gate settings can be stored in the Gate library, which contains 4 pre

Comp Library 171DM2000 Version 2—Owner’s ManualComp LibraryComp settings can be stored in the Comp library, which contains 36 preset memories and 92 u

172 Chapter 14—LibrariesDM2000 Version 2—Owner’s ManualEQ LibraryInput Channel, Bus Out, Aux Send, Matrix Send, and Stereo Out EQ settings can be stor

Automix Library 173DM2000 Version 2—Owner’s ManualAutomix LibraryUp to 16 Automixes can be stored in the Automix library. See page 193 for information

174 Chapter 15—Internal Effects, Plug-Ins & GEQsDM2000 Version 2—Owner’s Manual15 Internal Effects, Plug-Ins & GEQsAbout the EffectsThe DM200

Preset Effects & Types 175DM2000 Version 2—Owner’s ManualModulation-based EffectsGuitar EffectsDynamic EffectsCombination Effects# Preset Name Typ

176 Chapter 15—Internal Effects, Plug-Ins & GEQsDM2000 Version 2—Owner’s ManualOthers# Preset Name Type Description41 Multi.Filter MULTI.FILTER 3-

Editing Effects 177DM2000 Version 2—Owner’s ManualEditing EffectsThe internal effects processors can be edited as follows.1 Press the EFFECTS/PLUG INS

178 Chapter 15—Internal Effects, Plug-Ins & GEQsDM2000 Version 2—Owner’s ManualLevel meters: The Level meters indicate the input and output levels

About Plug-Ins 179DM2000 Version 2—Owner’s ManualAs of January 2004, the following Add-On Effect packages are available:• AE011 Channel Strip Package•

18 Chapter 1—WelcomeDM2000 Version 2—Owner’s ManualI/O Patching•Any available input port can be patched to the Input Channels, Insert Ins, or Effects

180 Chapter 15—Internal Effects, Plug-Ins & GEQsDM2000 Version 2—Owner’s ManualConfiguring Plug-InsPlug-Ins can be configured as follows.If you’ve i

Editing Plug-Ins 181DM2000 Version 2—Owner’s ManualEditing Plug-InsPlug-Ins can be edited as follows. The settings of Waves Plug-Ins and User Defined P

182 Chapter 15—Internal Effects, Plug-Ins & GEQsDM2000 Version 2—Owner’s ManualMIN/MAX: These parameters determine the minimum and maximum values

About the GEQs 183DM2000 Version 2—Owner’s ManualAbout the GEQsThe DM2000 features six 31-band graphic equalizers that can be inserted into the Bus Ou

184 Chapter 15—Internal Effects, Plug-Ins & GEQsDM2000 Version 2—Owner’s ManualGEQ parameters can also be adjusted by using Parameter controls #1

Scene Memories 185DM2000 Version 2—Owner’s Manual16 Scene MemoriesAbout Scene MemoriesScene memories allow you to store a snapshot of virtually every

186 Chapter 16—Scene MemoriesDM2000 Version 2—Owner’s ManualScene Memories #0 & #UScene memory #0 is a special read-only memory that contains the

Storing & Recalling Scenes with the SCENE MEMORY Buttons 187DM2000 Version 2—Owner’s ManualStoring & Recalling Scenes with the SCENE MEMORY Bu

188 Chapter 16—Scene Memories DM2000 Version 2—Owner’s Manual Using the Scene Memory Page On the Scene Memory page you can store, recall, write-protec

Fading Scenes 189DM2000 Version 2—Owner’s ManualFading ScenesFade times can be specified for individual Input Channels, Bus Outs, Aux Sends, Matrix Sen

Welcome 19DM2000 Version 2—Owner’s ManualSurround Sound•3-1, 5.1 and 6.1 Surround modes•Joystick control•Bass management•Down mixing•Surround monitor

190 Chapter 16—Scene MemoriesDM2000 Version 2—Owner’s ManualGlobal Fade Time: When this check box is checked, a Scene is recalled using the Fade Time

Sorting Scenes 191DM2000 Version 2—Owner’s ManualSorting ScenesScene can be sorted by using the Scene Memory Sort function.1 Use the SCENE MEMORY [DIS

192 Chapter 16—Scene MemoriesDM2000 Version 2—Owner’s Manual2 Use the cursor buttons, [SEL] buttons, or Parameter wheel to select the chan-nel categor

Automix 193DM2000 Version 2—Owner’s Manual17 AutomixAbout AutomixThe DM2000’s Automix function allows dynamic automation of virtually all mix parame-

194 Chapter 17—AutomixDM2000 Version 2—Owner’s ManualAutomix Main PageThis section explains the Automix Main page. 1 Use the AUTOMIX [DISPLAY] button

Automix Main Page 195DM2000 Version 2—Owner’s ManualEDIT OUT: These buttons are used to set the Edit Out mode: Off, Takeover, or Return. The Edit Out

196 Chapter 17—AutomixDM2000 Version 2—Owner’s ManualFADER EDIT: These buttons are used to set the Fader Edit mode: Absolute or Relative. The Fader Ed

Automix Main Page 197DM2000 Version 2—Owner’s ManualAUTOMIX: This button is used to enable and disable the Automix function. It works in unison with t

198 Chapter 17—AutomixDM2000 Version 2—Owner’s ManualAUTOMIX SectionCertain Automix functions and parameters can be controlled by using the buttons in

Channel Strip [AUTO] Buttons 199DM2000 Version 2—Owner’s ManualChannel Strip [AUTO] ButtonsThe channel strip [AUTO] buttons are used to arm channels i

WARNING: THIS APPARATUS MUST BE EARTHEDIMPORTANTTHE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: GREEN-AND-YE

20 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s Manual2 Control Surface & Rear PanelControl SurfaceCH01 CH02 CH03 CH04 CH05

200 Chapter 17—AutomixDM2000 Version 2—Owner’s Manual1 Use the AUTOMIX [DISPLAY] button to locate the Fader Edit pages.The CH1–48 Fader Edit page is s

Selecting the Timecode Source & Frame Rate 201 DM2000 Version 2 Owner’s Manual Selecting the Timecode Source & Frame Rate The timecode source

202 Chapter 17—AutomixDM2000 Version 2—Owner’s ManualCreating a Time Signature MapWhen using the MIDI CLOCK timecode source, you’ll also need to speci

Inserting Mix Parameters into Automix 203DM2000 Version 2—Owner’s Manual7 Start the timecode source.The AUTOMIX [REC] button indicator lights up conti

204 Chapter 17—AutomixDM2000 Version 2—Owner’s Manual2 Use the cursor buttons to select the INSERT button, then press [ENTER]. Alternatively, press th

Rerecording Events 205DM2000 Version 2—Owner’s Manual8 Use the cursor buttons to select the INSERT button, then press [ENTER]. Alternatively, press th

206 Chapter 17—AutomixDM2000 Version 2—Owner’s ManualParameter RecordingThe following table summarizes parameter recording operation for each paramete

Punching In & Out Individual Parameters 207DM2000 Version 2—Owner’s ManualPunching In & Out Individual ParametersDuring Automix rerecording, c

208 Chapter 17—AutomixDM2000 Version 2—Owner’s ManualIf during Automix recording you punch in an individual parameter by using the controls listed in

Editing Events Offline 209DM2000 Version 2—Owner’s ManualEditing Events OfflineAutomix events can be edited offline on the Event Job and Event Edit page

Control Surface 21DM2000 Version 2—Owner’s ManualAD Input SectionAD Input #1 is shown here.A +48V ON/OFF switchesThese switches turn on and off the +4

210 Chapter 17—AutomixDM2000 Version 2—Owner’s ManualThe SOURCE section enables you to select the copy source Automix. You can select CUR-RENT (the cu

Editing Events Offline 211DM2000 Version 2—Owner’s ManualThe TIME parameter determines the point to which the specified data is moved or merged. The nu

212 Chapter 17—AutomixDM2000 Version 2—Owner’s ManualThese buttons correspond to the following parameters:6 Use the cursor buttons to select the EXEC

Editing Events Offline 213DM2000 Version 2—Owner’s ManualEvent Edit PageOn the Event Edit page, you can edit, duplicate, delete, and insert new events

214 Chapter 17—AutomixDM2000 Version 2—Owner’s ManualEvent select buttons: These buttons are used to select the type of events to be displayed in the

MIDI 215 DM2000 Version 2—Owner’s Manual 18 MIDI MIDI & the DM2000 The DM2000 supports the following MIDI messages:•Program Changes for recallin

216 Chapter 18—MIDI DM2000 Version 2—Owner’s Manual MIDI Port Setup MIDI ports are configured as follows. 1 Use the DISPLAY ACCESS [SETUP] button to l

MIDI Channel Setup 217DM2000 Version 2—Owner’s ManualMIDI Channel SetupMIDI Channels for reception and transmission are specified as follows.1 Use the

218 Chapter 18—MIDIDM2000 Version 2—Owner’s ManualBULKThis parameter row enables or disables reception of Bulk Dump data.Rx ON/OFF: Reception of Bulk

Assigning Parameters to Control Changes 219DM2000 Version 2—Owner’s ManualAssigning Parameters to Control ChangesDM2000 parameters can be assigned to

22 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualD SOLO buttonsThese buttons are used to solo Channels. The [SOLO] button i

220 Chapter 18—MIDIDM2000 Version 2—Owner’s ManualUsing Bulk DumpDM2000 data can be stored to an external MIDI device, such as a MIDI data filer, by us

Pro Tools Remote Layer 221DM2000 Version 2—Owner’s Manual19 Pro Tools Remote LayerThe DM2000 features a Remote Layer target especially designed for c

222 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualConfiguring the DM20001 Use the DISPLAY ACCESS [SETUP] button to locate the MIDI/TO

Configuring Pro Tools 223DM2000 Version 2—Owner’s Manual4 When the Peripherals window appears, click the MIDI Controllers button.5 Select HUI as the T

224 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualControl Surface Operation with the Pro Tools Remote LayerThis section explains the

Control Surface Operation with the Pro Tools Remote Layer 225DM2000 Version 2—Owner’s ManualINSERT ASSIGN/EDITASSIGN: This indicator works in unison w

226 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualEncoders & Push-SwitchesThe Encoders are used to set pan and send levels and s

Control Surface Operation with the Pro Tools Remote Layer 227DM2000 Version 2—Owner’s ManualChannel Strip DisplaysThe fluorescent channel strip display

228 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualMATRIX SELECT Section[MATRIX 1] (DEFAULT) buttonThis button is used in conjunction

Control Surface Operation with the Pro Tools Remote Layer 229DM2000 Version 2—Owner’s Manual[ASSIGN 1] (INPUT) buttonThis button is used in conjunctio

Control Surface 23DM2000 Version 2—Owner’s ManualAUX SELECTAAUX SELECT DISPLAY buttonThis button is used to select the following pages: Aux Send, Aux

230 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualEFFECTS/PLUG-INS Section[DISPLAY] (SHOW INSERT) buttonThis button is used to open

Control Surface Operation with the Pro Tools Remote Layer 231DM2000 Version 2—Owner’s ManualSELECTED CHANNEL Section ROUTING[1] buttonSelects the pre

232 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s Manual DYNAMICS[THRESHOLD] controlIf the ROUTING [6] button indicator is off, the [THRE

Control Surface Operation with the Pro Tools Remote Layer 233DM2000 Version 2—Owner’s ManualTRACK ARMING Section[1–24] (REC/RDY) buttonsThese buttons

234 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s Manual[REC] (WRITE), [ABORT/UNDO] (TOUCH), [AUTOREC] (LATCH), [RETURN] (READ), [RELATIVE

Control Surface Operation with the Pro Tools Remote Layer 235DM2000 Version 2—Owner’s Manual[12] (CTRL/CLUTCH) & [13] (Command-ALT/FINE) buttonsTh

236 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s Manual•Press the [POST] button to audition from the out point of the selected region, co

Control Surface Operation with the Pro Tools Remote Layer 237DM2000 Version 2—Owner’s ManualData Entry & Transport Section[REW] buttonThis button

238 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s Manual[SHUTTLE] & [SCRUB] buttonsThese buttons are used to select the Shuttle and Sc

Selecting Channels 239DM2000 Version 2—Owner’s ManualSelecting ChannelsChannels can be selected as follows.(Make sure the ENCODER MODE [ASSIGN 4] (INS

24 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualD ASSIGN 1–4 buttonsThese buttons are used to select the assignable Encode

240 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualAssigning Outputs to ChannelsChannels can be assigned to output destinations as fo

Muting Channels 241DM2000 Version 2—Owner’s ManualMuting ChannelsChannels can be muted as follows.1 Use the [ON] buttons to mute channels.The [ON] but

242 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualAssigning Send DestinationsSends can be assigned to output destinations as follows

Setting Send Levels 243DM2000 Version 2—Owner’s ManualSetting Send LevelsSend levels can be set as follows.1 Use the AUX SELECT [AUX 1]–[AUX 5] (SEND

244 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s Manual3 Use the faders, Encoders, and [ON] buttons to control the currently selected sen

Editing Plug-ins 245DM2000 Version 2—Owner’s ManualEditing Plug-insPlug-ins can be edited as follows.(Make sure the MATRIX SELECT [MATRIX 4] (INSERT B

246 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualBypassing Individual Plug-insIndividual plug-ins can be bypassed as follows.(Make

Resetting Faders, Sends, Panpots & Plug-ins 247DM2000 Version 2—Owner’s ManualResetting Faders, Sends, Panpots & Plug-insFaders, panpots, send

248 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualZoomingThe cursor buttons can be used to zoom the Edit window as follows.1 Use the

Scrub & Shuttle 249DM2000 Version 2—Owner’s ManualScrub & ShuttleThe Parameter wheel can be used to scrub and shuttle as follows.1 Make sure t

Control Surface 25DM2000 Version 2—Owner’s ManualF MIDI buttonThis button is used to select the following pages: MIDI Setup, Program Change Assign Ta

250 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualAutomationViewing the Automation ModeThe Automation mode setting of each channel c

Automation 251DM2000 Version 2—Owner’s ManualTrim ModeTr im mode can be set as follows.1 While holding down a channel’s [AUTO] button, press the AUTOM

252 Chapter 19—Pro Tools Remote LayerDM2000 Version 2—Owner’s ManualPannerSelecting a TrackUse the SELECTED CHANNEL ROUTING buttons to manipulate the

Remote Control 253DM2000 Version 2—Owner’s Manual20 Remote ControlAbout Remote LayersThe DM2000’s four Remote Layers allow you to control external MI

254 Chapter 20—Remote ControlDM2000 Version 2—Owner’s ManualConfiguring User Defined Remote LayersUser Defined Remote Layers can be configured as follows.

About Remote Layers 255DM2000 Version 2—Owner’s ManualENCODER: These parameters are used to specify the MIDI message (up to 16 bytes) to be transmitte

256 Chapter 20—Remote Control DM2000 Version 2—Owner’s Manual About Machine Control (MMC & P2) The DM2000 can control the transport, locate funct

About Machine Control (MMC & P2) 257DM2000 Version 2—Owner’s ManualConfiguring the REMOTE PortIf you are using the P2 protocol to control a machine

258 Chapter 20—Remote ControlDM2000 Version 2—Owner’s ManualUsing Shuttle & ScrubThe Parameter wheel can be used to shuttle and scrub the external

About Machine Control (MMC & P2) 259DM2000 Version 2—Owner’s Manualpost-roll time. The pre-roll and post-roll times can be specified on the Locate

26 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualEFFECTS/PLUG-INSAEFFECTS/PLUG-INS DISPLAY buttonThis button is used to sel

260 Chapter 20—Remote ControlDM2000 Version 2—Owner’s Manualmachine switches to input monitor and starts recording. At the out point, the machine swit

About Machine Control (MMC & P2) 261DM2000 Version 2—Owner’s ManualPREROLL TIME: In conjunction with the in point, this determines the position th

262 Chapter 20—Remote ControlDM2000 Version 2—Owner’s ManualConfiguring MTR Track ArmingYou can assign MTR machine tracks to the TRACK ARMING [1–24] bu

About Machine Control (MMC & P2) 263DM2000 Version 2—Owner’s Manual2 Use the cursor buttons to select the parameters, and use the Parameter wheel,

264 Chapter 20—Remote ControlDM2000 Version 2—Owner’s ManualGPI (General Purpose Interface)The DM2000’s CONTROL port (25-pin D-sub connector) provides

GPI (General Purpose Interface) 265DM2000 Version 2—Owner’s Manual4 Select one of two buttons located to the right of trigger signal parameters INPUT

266 Chapter 20—Remote ControlDM2000 Version 2—Owner’s Manual6 Use the buttons located to the right of the OUTPUT (1–8) parameters to switch the polari

Controlling AD8HR/AD824 A/D Converters 267DM2000 Version 2—Owner’s ManualControlling AD8HR/AD824 A/D ConvertersYou can control the parameters of up to

268 Chapter 20—Remote ControlDM2000 Version 2—Owner’s ManualControlling AD8HR/AD824s from the DM2000Connected AD8HR/AD824s are controlled from the HA

Other Functions 269DM2000 Version 2—Owner’s Manual21 Other FunctionsUsing the User Assignable LayersIf you set the Remote layer target to “USER ASSIG

Control Surface 27DM2000 Version 2—Owner’s ManualH Parameter controls 1–4These are rotary controls and push switches. The rotary controls are used to

270 Chapter 21—Other FunctionsDM2000 Version 2—Owner’s ManualUsing the User Defined KeysUp to 16 functions from a list of over 200 can be assigned to t

Saving DM2000 Data to SmartMedia 271DM2000 Version 2—Owner’s ManualYou can initialize the assignments of the currently selected bank by selecting the

272 Chapter 21—Other FunctionsDM2000 Version 2—Owner’s ManualSCENE MEM: Saves Scenes. You can save ALL Scenes, individual Scenes, or the Edit Buffer (

Saving DM2000 Data to SmartMedia 273DM2000 Version 2—Owner’s ManualManaging Files & SmartMediaFiles stored on SmartMedia can be renamed and delete

274 Chapter 21—Other FunctionsDM2000 Version 2—Owner’s ManualThe following file types are compatible between these different consoles:•Scene Memory (fil

Setting Preferences 275DM2000 Version 2—Owner’s ManualAuto AUX/MATRIX Display: When this preference is on, the Aux View pages appear automatically whe

276 Chapter 21—Other FunctionsDM2000 Version 2—Owner’s ManualMeter Follow Layer: When this preference is on, the optional MB2000 Peak Meter Bridge aut

Setting Preferences 277DM2000 Version 2—Owner’s Manualis off, the DM2000 always recognizes fader movements. If the SELECT button is on, you can select

278 Chapter 21—Other FunctionsDM2000 Version 2—Owner’s ManualReceive Full Frame Message: When this preference is on, MTC full frame messages are recog

Using the Oscillator 279DM2000 Version 2—Owner’s ManualUsing the OscillatorThe DM2000 features an oscillator that can be used for calibration or diagn

28 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualSELECTED CHANNEL SectionThe subsections of the SELECTED CHANNEL section ar

280 Chapter 21—Other FunctionsDM2000 Version 2—Owner’s ManualOperation LockThe DM2000 features the Operation Lock function, which avoids unintentional

Operation Lock 281DM2000 Version 2—Owner’s Manual5 Use the buttons in the OPERATION LOCK SAFE section to select certain con-trols on the panel to excl

282 Chapter 21—Other Functions DM2000 Version 2—Owner’s Manual Checking the Battery and the System Version The condition of the internal memory-backu

USER DEFINED KEYS 283DM2000 Version 2—Owner’s ManualAppendix A: Parameter ListsUSER DEFINED KEYS# Function Display0 No ASSIGN No Assign1 Scene MEM. Re

284 Appendix A: Parameter ListsDM2000 Version 2—Owner’s Manual106 Output MUTE Group Enable V Out Mute Group V107 Output MUTE Group Enable W Out Mute G

USER DEFINED KEYS Initial Assignments 285DM2000 Version 2—Owner’s ManualUSER DEFINED KEYS Initial AssignmentsNo.Bank A(Surround Monitor)Bank B(Scene R

286 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualInput Patch Parametersinput Channel Inputs Input Channel insert Ins Internal Effects Pro

Input Patch Parameters 287DM2000 Version 2—Owner’s ManualS2-12 Slot2 CH12 IN S2-12 Slot2 CH12 IN INSCH40 InsertOut-CH40S2-13 Slot2 CH13 IN S2-13 Slot2

288 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualS6-1 Slot6 CH1 IN S6-1 Slot6 CH1 IN INSCH93 InsertOut-CH93S6-2 Slot6 CH2 IN S6-2 Slot6 C

Initial Input Patch Settings 289DM2000 Version 2—Owner’s ManualInitial Input Patch SettingsInput Channel Inputs Effects Processors inputs2TA2R 2TR IN

Control Surface 29DM2000 Version 2—Owner’s ManualE ROUTING 1–8 buttonsThese buttons are used to route the currently selected Input Channel to the Bus

290 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualOutput Patch ParametersOutput patch parameters are split into two tables. The first table

Output Patch Parameters 291DM2000 Version 2—Owner’s ManualINSCH16 InsertOut-CH16 INSCH16 InsertOut-CH16 S2-6 Slot2 CH6 ININSCH17 InsertOut-CH17 INSCH1

292 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualINSCH69 InsertOut-CH69 INSCH69 InsertOut-CH69 S5-11 Slot5 CH11 ININSCH70 InsertOut-CH70

Output Patch Parameters 293DM2000 Version 2—Owner’s ManualINSMTX3R InsertOut-MTX3R INSMTX3R InsertOut-MTX3R 2TD2R 2TR IN Dig.2 RINSMTX4L InsertOut-MTX

294 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualOutput Patch Table 2Direct Outs 2TR Digital Outs GEQsSource Description Source Descripti

Output Patch Parameters 295DM2000 Version 2—Owner’s ManualS4-4 Slot4 CH4 OUT INSCH22 InsertOut-CH22 — —S4-5 Slot4 CH5 OUT INSCH23 InsertOut-CH23 — —S4

296 Appendix A: Parameter ListsDM2000 Version 2—Owner’s Manual2TD1R 2TR OUT Dig.1 R INSCH76 InsertOut-CH76 — —2TD2L 2TR OUT Dig.2 L INSCH77 InsertOut-

Initial Output Patch Settings 297DM2000 Version 2—Owner’s ManualInitial Output Patch SettingsSlot Outputs Omni Outs Direct Outs# Source # Source Desti

298 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualInitial Input Channel NamesInput Channel IDShort Name Long NameCH01 CH01 CH01CH02 CH02 C

Initial Output Channel Names 299DM2000 Version 2—Owner’s ManualInitial Output Channel NamesOutput Channel IDShort Name Long NameBUS1 BUS1 BUS1BUS2 BUS

Important Information 3 DM2000 Version 2—Owner’s Manual Important Information Warnings •Connect this unit’s power cord only to an AC outlet of the typ

30 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualAUX/MATRIX SENDA AUX/MATRIX SEND DISPLAY buttonThe pages selected by this

300 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualInitial Input Port NamesPort PORT ID Short Name Long NameAD1 AD01 AD01 AD IN 1AD2 AD02 A

Initial Output Port Names 301DM2000 Version 2—Owner’s ManualInitial Output Port NamesPort Port ID Short Name Long NameSLOT1-01 S1-01 S101 Slot1 CH1 OU

302 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualGPI Trigger Source & Target ListINPUT#Target0 NO ASSIGN1TALKBACK2 SLATE3 DIMMER4 MON

GPI Trigger Source & Target List 303DM2000 Version 2—Owner’s Manual220 CH59 ON UNLATCH221 CH60 ON UNLATCH222 CH61 ON UNLATCH223 CH62 ON UNLATCH224

304 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualOUTPUT#Target0 NO ASSIGN1 CH1 FADER ON2 CH2 FADER ON3 CH3 FADER ON4 CH4 FADER ON5 CH5 FA

GPI Trigger Source & Target List 305DM2000 Version 2—Owner’s Manual232 AUX7 FADER OFF233 AUX8 FADER OFF234 AUX9 FADER OFF235 AUX10 FADER OFF236 AU

306 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualUser Defined Remote Layer Initial Bank SettingsBank 1 (GM Vol & Pan)IDNameControllerD

User Defined Remote Layer Initial Bank Settings 307DM2000 Version 2—Owner’s ManualBank 2 (GM Vol & Effect 1)IDNameControllerData FormatShort Long

308 Appendix A: Parameter ListsDM2000 Version 2—Owner’s ManualBank 3 (XG Vol & Pan)IDNameControllerData FormatShort Long 12345678910111213141516RM

User Defined Remote Layer Initial Bank Settings 309DM2000 Version 2—Owner’s ManualBank 4 (Nuendo VST Mixer)IDNameControllerData FormatShort Long 12345

Control Surface 31DM2000 Version 2—Owner’s ManualB GATE/COMP buttonThis button is used to set the rotary controls for either Gate or Compressor operat

310 Appendix A: Parameter ListsDM2000—Owner’s ManualEffects ParametersREVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATEOne input, two output hall,

Effects Parameters 311DM2000—Owner’s ManualMONO DELAYOne input, one output basic repeat delay.STEREO DELAYTwo input, two output basic stereo delay.MOD

312 Appendix A: Parameter ListsDM2000—Owner’s ManualDELAY LCROne input, two output 3-tap delay (left, center, right).ECHOTwo input, two output stereo

Effects Parameters 313DM2000—Owner’s ManualCHORUSTwo input, two output chorus effect.FLANGETwo input, two output flange effect.Parameter Range Descript

314 Appendix A: Parameter ListsDM2000—Owner’s ManualSYMPHONICTwo input, two output symphonic effect.PHASERTwo input, two output 16-stage phaser.Parame

Effects Parameters 315DM2000—Owner’s ManualAUTOPANTwo input, two output autopanner.TREMOLOTwo input, two output tremolo effect.HQ. PITCHOne input, two

316 Appendix A: Parameter ListsDM2000—Owner’s ManualDUAL PITCHTwo input, two output pitch shifter.ROTARYOne input, two output rotary speaker simulator

Effects Parameters 317DM2000—Owner’s ManualMOD. FILTERTwo input, two output modulation filter.DISTORTIONOne input, two output distortion effect.AMP SIM

318 Appendix A: Parameter ListsDM2000—Owner’s ManualDYNA. FILTERTwo input, two output dynamically controlled filter.DYNA. FLANGETwo input, two output d

Effects Parameters 319DM2000—Owner’s ManualREV+CHORUSOne input, two output reverb and chorus effects in parallel.REV->CHORUSOne input, two output r

32 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualD PAN controlThis rotary control is used to pan the currently selected Inp

320 Appendix A: Parameter ListsDM2000—Owner’s ManualREV+FLANGEOne input, two output reverb and flanger effects in parallel.REV->FLANGEOne input, two

Effects Parameters 321DM2000—Owner’s ManualREV+SYMPHO.One input, two output reverb and symphonic effects in parallel.REV->SYMPHO.One input, two out

322 Appendix A: Parameter ListsDM2000—Owner’s ManualREV->PANOne input, two output reverb and autopan effects in parallel.DELAY+ER.One input, two ou

Effects Parameters 323DM2000—Owner’s ManualDELAY->ER.One input, two output delay and early reflections effects in series.DELAY+REVOne input, two out

324 Appendix A: Parameter ListsDM2000—Owner’s ManualDELAY->REVOne input, two output delay and reverb effects in series.DIST->DELAYOne input, two

Effects Parameters 325DM2000—Owner’s ManualMULTI FILTERTwo input, two output 3-band multi-filter (24 dB/octave).FREEZEOne input, one output basic sampl

326 Appendix A: Parameter ListsDM2000—Owner’s ManualST REVERBTwo input, two output stereo reverb.REVERB 5.1One input, six output reverb for 5.1 surrou

Effects Parameters 327DM2000—Owner’s ManualOCTA REVERBEight input, eight output reverb.AUTO PAN 5.1Six input, six output autopanner for 5.1 surround.

328 Appendix A: Parameter ListsDM2000—Owner’s ManualFLANGE 5.1Six input, six output flanger for 5.1 surround.SYMPHO 5.1Six input, six output symphonic

Effects Parameters 329DM2000—Owner’s ManualM. BAND DYNA.Two input, two output 3-band dynamics processor, with individual solo and gain reduction meter

Control Surface 33DM2000 Version 2—Owner’s ManualEQUALIZERA EQUALIZER DISPLAY buttonThis button is used to select the following pages: Equalizer Edit,

330 Appendix A: Parameter ListsDM2000—Owner’s ManualCOMP 5.1Six input, six output compressor for 5.1 surround, with individual solo for each band, and

Effects and tempo synchronization 331DM2000—Owner’s ManualEffects and tempo synchronizationSome of the DM2000’s effects allow you to synchronize the e

332 Appendix A: Parameter ListsDM2000—Owner’s ManualPreset EQ Parameters#TitleParameterLOW L-MID H-MID HIGH01Bass Drum 1PEAKING PEAKING PEAKING H.SHEL

Preset Gate Parameters (fs = 44.1 kHz) 333DM2000—Owner’s ManualPreset Gate Parameters (fs = 44.1 kHz)25Male Vocal 1PEAKING PEAKING PEAKING PEAKINGG–0.

334 Appendix A: Parameter ListsDM2000—Owner’s ManualPreset Compressor Parameters (fs = 44.1 kHz)#Title Type Parameter Value1Comp COMPThreshold (dB) –8

Preset Compressor Parameters (fs = 44.1 kHz) 335DM2000—Owner’s Manual19Strings1 COMPThreshold (dB) –11Ratio ( :1) 2Attack (ms) 33Out gain (dB) 1.5Kn

336 Appendix A: Parameter ListsDM2000—Owner’s ManualDynamics ParametersThe dynamics effects for each channel strip include a Gate section (only for In

Dynamics Parameters 337DM2000—Owner’s ManualDUCKINGDucking is commonly used for voice-over applications in which the background music level is reduced

338 Appendix A: Parameter ListsDM2000—Owner’s ManualCOMP SectionCOMPThe COMP processor attenuates signals above a specified THRESHOLD by a specified RAT

Dynamics Parameters 339DM2000—Owner’s ManualEXPANDAn expander attenuates signals below a specified THRESHOLD by a specified RATIO.Parameter Range Descri

34 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualLAYERA1–24, 25–48, 49–72 & 73–96 buttonsThese buttons select the Input

340 Appendix A: Parameter ListsDM2000—Owner’s ManualCOMPANDER HARD (H)COMPANDER SOFT (S)The hard and soft companders combine the effects of the compre

General Spec 341DM2000—Owner’s ManualAppendix B: SpecificationsGeneral SpecNumber of scene memories 99Sampling FrequencyInternal 44.1 kHz, 48 kHz, 88.2

342 Appendix B: SpecificationsDM2000—Owner’s ManualInput Channel CH1–96Input patch —Phase Normal/reverseGate-type3On/offKey in: 12 ch Group (1–12, 13–

General Spec 343DM2000—Owner’s ManualOption Output (SLOT 1–6)Available card Optional digital interface card (MY16, MY8, MY4 series)Output patchSURROUN

344 Appendix B: SpecificationsDM2000—Owner’s ManualMATRIX 1L–4RComp-type4On/offPre EQ/pre fader/post faderAttenuator –96.0 to +12.0 dB (0.1 dB step)EQ

General Spec 345DM2000—Owner’s ManualEQ ParametersGate ParametersComp ParametersLOW/HPF L-MID H-MID HIGH /LPFQ0.1–10.0(41 points)low shelvingHPF0.1–10

346 Appendix B: SpecificationsDM2000—Owner’s ManualLibrariesCompander HThreshold –54 dB to 0 dB (0.1 dB step)Ratio (x :1) x=1, 1.1, 1.3, 1.5, 1.7, 2,

Analog Input Spec 347DM2000—Owner’s ManualAnalog Input SpecIn these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775

348 Appendix B: SpecificationsDM2000—Owner’s ManualDigital Input SpecDigital Output SpecInput Format Data length Level Connector2TR IN DIGITAL1AES/EBU

I/O Slot Spec 349 DM2000—Owner’s Manual I/O Slot Spec Each I/O SLOT accepts a digital interface card. Only SLOT #1 has a serial interface. Control I/

Control Surface 35DM2000 Version 2—Owner’s ManualTRACK ARMINGATRACK ARMING DISPLAY buttonThis button is used to select the following pages: Track Armi

350 Appendix B: SpecificationsDM2000—Owner’s ManualConnector Pin AssignmentsCASCADE IN CASCADE OUTREMOTE Port CONTROL PortPin Signal Pin Signal Pin Si

Dimensions 351DM2000—Owner’s ManualDimensionsSpecifications and external appearance subject to change without notice.For European ModelPurchaser/User I

352 Appendix C: MIDIDM2000 Version 2—Owner’s ManualAppendix C: MIDIScene Memory to Program Change TableProgram Change #Initial Scene #User Scene #Prog

Initial Parameter to Control Change Table 353DM2000 Version 2—Owner’s ManualInitial Parameter to Control Change TableCHANNEL1# HIGH MID LOW0 NO ASSIGN

354 Appendix C: MIDIDM2000 Version 2—Owner’s ManualCHANNEL2# HIGH MID LOW0 NO ASSIGN1FADER H CHANNEL INPUT252FADER H CHANNEL INPUT263FADER H CHANNEL I

Initial Parameter to Control Change Table 355DM2000 Version 2—Owner’s ManualCHANNEL3# HIGH MID LOW0 NO ASSIGN1FADER H CHANNEL INPUT492FADER H CHANNEL

356 Appendix C: MIDIDM2000 Version 2—Owner’s ManualCHANNEL4# HIGH MID LOW0 NO ASSIGN1FADER H CHANNEL INPUT732FADER H CHANNEL INPUT743FADER H CHANNEL I

Initial Parameter to Control Change Table 357DM2000 Version 2—Owner’s ManualCHANNEL5# HIGH MID LOW0 NO ASSIGN1EQATT H INPUT12EQATT H INPUT23EQATT H IN

358 Appendix C: MIDIDM2000 Version 2—Owner’s ManualCHANNEL6# HIGH MID LOW0 NO ASSIGN1EQATT H INPUT252EQATT H INPUT263EQATT H INPUT274EQATT H INPUT285E

Initial Parameter to Control Change Table 359DM2000 Version 2—Owner’s ManualCHANNEL7# HIGH MID LOW0 NO ASSIGN1EQATT H INPUT492EQATT H INPUT503EQATT H

36 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualD STORE buttonThis button is used to store the current Scene to the select

360 Appendix C: MIDIDM2000 Version 2—Owner’s ManualCHANNEL8# HIGH MID LOW0 NO ASSIGN1EQATT H INPUT732EQATT H INPUT743EQATT H INPUT754EQATT H INPUT765E

Initial Parameter to Control Change Table 361DM2000 Version 2—Owner’s ManualCHANNEL9# HIGH MID LOW0 NO ASSIGN1 SURROUND LFE H INPUT12 SURROUND LFE H I

362 Appendix C: MIDIDM2000 Version 2—Owner’s ManualCHANNEL10# HIGH MID LOW0 NO ASSIGN1 SURROUND LFE H INPUT252 SURROUND LFE H INPUT263 SURROUND LFE H

Initial Parameter to Control Change Table 363DM2000 Version 2—Owner’s ManualCHANNEL11# HIGH MID LOW0 NO ASSIGN1 SURROUND LFE H INPUT492 SURROUND LFE H

364 Appendix C: MIDIDM2000 Version 2—Owner’s ManualCHANNEL12# HIGH MID LOW0 NO ASSIGN1 SURROUND LFE H INPUT732 SURROUND LFE H INPUT743 SURROUND LFE H

Initial Parameter to Control Change Table 365DM2000 Version 2—Owner’s ManualCHANNEL13# HIGH MID LOW0 NO ASSIGN1 SURROUND LR INPUT12 SURROUND LR INPUT2

366 Appendix C: MIDIDM2000 Version 2—Owner’s ManualCHANNEL14# HIGH MID LOW0 NO ASSIGN1 SURROUND LR INPUT252 SURROUND LR INPUT263 SURROUND LR INPUT274

Initial Parameter to Control Change Table 367DM2000 Version 2—Owner’s ManualCHANNEL15# HIGH MID LOW0 NO ASSIGN1 SURROUND LR INPUT492 SURROUND LR INPUT

368 Appendix C: MIDIDM2000 Version 2—Owner’s ManualCHANNEL16# HIGH MID LOW0 NO ASSIGN1 SURROUND LR INPUT732 SURROUND LR INPUT743 SURROUND LR INPUT754

MIDI Data Format 369DM2000 Version 2—Owner’s ManualMIDI Data FormatIn the following tables, “tx” means that transmission from the DM2000 is possible,

Control Surface 37DM2000 Version 2—Owner’s ManualH TOUCH SENSE buttonThis button is used to turn on and off Fader Touch Sense for Automix recording. S

370 Appendix C: MIDIDM2000 Version 2—Owner’s Manualtransmitted on the [Tx CH] if [Control Change Tx] is ON, using the four messages NRPN control numbe

Format Details 371DM2000 Version 2—Owner’s Manual11. ACTIVE SENSING (FE)ReceptionOnce this message has been received, the failure to receive any messa

372 Appendix C: MIDIDM2000 Version 2—Owner’s Manual13.3.3 Setup memory bulk dump formatOf the setup memory of the DM2000, this bulk-dumps data other t

Format Details 373DM2000 Version 2—Owner’s Manual13.3.8 User defined plug-in bulk dump request formatThe second and third bytes of the DATA NAME indica

374 Appendix C: MIDIDM2000 Version 2—Owner’s Manual13.3.14 Control change table bulk dump request format13.3.15 Program change table bulk dump format1

Format Details 375DM2000 Version 2—Owner’s Manual13.3.19 Compressor library bulk dump formatThe second and third bytes of the DATA NAME indicate the l

376 Appendix C: MIDIDM2000 Version 2—Owner’s Manual13.3.24 Effect library bulk dump request formatThe second and third bytes of the DATA NAME indicate

Format Details 377DM2000 Version 2—Owner’s Manual13.3.29 Input patch library bulk dump formatThe second and third bytes of the DATA NAME indicate the

378 Appendix C: MIDIDM2000 Version 2—Owner’s Manual13.3.34 Bus to stereo library bulk dump request formatThe second and third bytes of the DATA NAME i

Format Details 379DM2000 Version 2—Owner’s Manual13.3.40 Plug-in effect card bulk dump request formatThe second and third bytes of the DATA NAME indic

38 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualD IN buttonPressing this button transmits a Locate command to the target m

380 Appendix C: MIDIDM2000 Version 2—Owner’s Manual13.4.6 Parameter change (Edit buffer)ReceptionIf [Parameter change RX] is ON and the [Rx CH] matche

Format Details 381 DM2000 Version 2—Owner’s Manual 13.4.13 Parameter request (Backup memory) Reception If [Parameter change RX] is ON and the [Rx CH]

382 Appendix C: MIDI DM2000 Version 2—Owner’s Manual 13.4.17 Parameter change (Function call: scene/library clear) Reception If [Parameter change RX]

Format Details 383DM2000 Version 2—Owner’s Manual13.4.21 Parameter Request (Sort table data)ReceptionThis is received if [Parameter change RX] is ON a

384 Appendix C: MIDIDM2000 Version 2—Owner’s Manual13.4.27 Parameter change (Remote meter)When transmission is enabled by receiving a Request of Remot

Format Details 385DM2000 Version 2—Owner’s Manual13.4.32 Parameter request (Automix status)ReceptionIf [Parameter change RX] is ON and the [Rx CH] mat

386 Appendix D: OptionsDM2000 Version 2—Owner’s ManualAppendix D: OptionsMB2000 Peak Meter BridgeInstallation1 Attach the brackets to the meter bridge

MB2000 Peak Meter Bridge 387DM2000 Version 2—Owner’s ManualMeter Bridge ControlsAChannel indicatorsThese indicators show which channels are currently

388 Appendix D: OptionsDM2000 Version 2—Owner’s ManualSP2000 Wooden Side PanelsAttach the left side panel as shown below. Attach the right side panel

Index 389DM2000 Version 2—Owner’s ManualIndexSymbols+48V ON/OFF switches 21Numerics1–24 button 3425–48 button 342TR I/Ochannel status 73dithering outp

Control Surface 39DM2000 Version 2—Owner’s ManualP REHEARSAL buttonThis button is used to turn on and off the Rehearsal function on the target machine

390 IndexDM2000 Version 2—Owner’s Manualgrouping mutes 149inserts 135link pan to input channels 116master level setting 119metering 129Mix minus 117mu

Index 391DM2000 Version 2—Owner’s ManualControl surface & rear panel chapter 20Cooling fan 50COPY button 33Copy Initial Fader preference 277Copy,

392 IndexDM2000 Version 2—Owner’s ManualEQautomix 193channel strip displays 55EQUALIZER EDIT page 134features 18frequency 133gain 133grouping input ch

Index 393DM2000 Version 2—Owner’s ManualInput channelsattenuating 130automix 193channel library 166compressors 137copying 155delay 141EQ 131gating 85g

394 IndexDM2000 Version 2—Owner’s ManualMatrix sendsattenuating 130automix 193balance 126channel library 166channel strip displays 56compressors 137co

Index 395DM2000 Version 2—Owner’s ManualOUTPUT PORT NAME page 82Output port naming 82Overwrite parameters 196PP2. See Machine controlPackage contents

396 IndexDM2000 Version 2—Owner’s ManualProgram changesassignments 218echoing 217omni 217receive enable 217storing assignments to smartmedia 271storin

Index 397DM2000 Version 2—Owner’s ManualSlotsabout 50, 70available cards 70channel status 73dithering outputs 73double channel 72double speed 72instal

398 IndexDM2000 Version 2—Owner’s ManualTurning on the DM2000 51Type I/II EQ 134UUndo automix 197Undo scene memory 186UPDATE 194USB TO HOST port 48dri

DM2000 Block Diagram2222228PHONES LEVEL161616161616PANLEVELSTEREO LSTEREO RSOLO LSOLO RAUX 1AUX 12SLOT1SLOT2SLOT3SLOT416161616BUS1BUS2BUS3BUS4BUS5BUS6

4 Important InformationDM2000 Version 2—Owner’s Manual•Hold the power cord plug when disconnecting it from an AC outlet. Never pull the cord. A damage

40 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualH SCRUB buttonThis button is used to set the Parameter wheel to Scrub mode

DM2000 Level DiagramDADSP Noise FloorPHASE GATEADdBuAnalogCASCADE IN CASCADE OUTDigital Clipping LevelMax. OutputNominal Output[+18dBu][+4dBu][+18dB

YAMAHA [Digital Mixing Console-Internal Parameters] Date: Feb 01, 2002Model: DM2000 MIDI Implementation Chart Version: 1.0Function... Transmitted Reco

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation© 2004 Yamaha CorporationWC42260 604IPAP25.1-05E0Printed in JapanYamaha

Control Surface 41DM2000 Version 2—Owner’s ManualMonitor, Phones & Talkback SectionASMALL TRIM controlThis control is used to set the level of the

42 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualMONITOR SectionThe various subsections of the MONITOR section are explaine

Control Surface 43DM2000 Version 2—Owner’s ManualCONTROL ROOMA STEREO 2TR D1 buttonThis button selects the 2TR IN DIGITAL AES/EBU 1 as the Control Roo

44 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualM MONO buttonThis button is used to switch the Control Room Monitor signal

Rear Panel 45DM2000 Version 2—Owner’s ManualRear PanelAD Input Section (p. 46)SLOT Section (p. 50)Analog Master I/O Section (p. 46)OMNI OUT Section (p

46 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualAD Input SectionA INPUT A & B (BAL) connectorsAD Inputs 1 through 24 f

Rear Panel 47DM2000 Version 2—Owner’s ManualB STEREO OUT +4 dB (BAL)These balanced XLR-3-32-type connectors, nomi-nal output level +4 dB, output the a

48 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualDigital I/O & Control SectionAKEYBOARD connectorA PS/2 compatible keyb

Rear Panel 49DM2000 Version 2—Owner’s ManualK 2TR OUT DIGITAL AES/EBU 1 & 2These XLR-3-32-type connectors output AES/EBU format digital audio, and

SmartMedia Handling Precautions 5 DM2000 Version 2—Owner’s Manual SmartMedia Handling Precautions •The CARD slot is for use with SmartMedia only. Nev

50 Chapter 2—Control Surface & Rear PanelDM2000 Version 2—Owner’s ManualPower SectionA POWER ON/OFF switchThis switch is used to turn on the power

Operating Basics 51DM2000 Version 2—Owner’s Manual3 Operating BasicsConnecting the Power CordConnect the socket-end of the supplied power cord to the

52 Chapter 3—Operating BasicsDM2000 Version 2—Owner’s ManualAbout the DisplayAll DM2000 mix parameters can be edited on the various display pages.Curr

Selecting Display Pages 53DM2000 Version 2—Owner’s ManualPage area: This area of the display is where the various display pages appear.Page tabs: Thes

54 Chapter 3—Operating BasicsDM2000 Version 2—Owner’s ManualDisplay Page ControlsOperation of the various buttons, rotary controls, and faders that ap

Using a Keyboard 55DM2000 Version 2—Owner’s ManualUsing a KeyboardA PS/2 compatible keyboard can be connected to the KEYBOARD port and used for quick

56 Chapter 3—Operating BasicsDM2000 Version 2—Owner’s ManualEncoder DisplaysOperation of the Encoder displays depends on the parameter assigned to the

Channel Strip Displays 57DM2000 Version 2—Owner’s ManualOther ParametersDelay Time, EQ Q, EQ Frequency, Comp Threshold, Comp Ratio, Comp Attack, Comp

58 Chapter 3—Operating BasicsDM2000 Version 2—Owner’s ManualSelecting LayersInput and Output Channels are arranged into Layers, as illustrated below.

Selecting Channels 59DM2000 Version 2—Owner’s ManualSelecting ChannelsTo select Input and Output Channels for editing with the SELECTED CHANNEL cont

6 Important Information DM2000 Version 2—Owner’s Manual Copyright No part of the DM2000, its software, or this Owner’s Manual may be reproduced or

60 Chapter 3—Operating BasicsDM2000 Version 2—Owner’s ManualStereo Out [SEL] ButtonThe Stereo Out [SEL] button is used exclusively to select the Stere

Selecting Encoder Modes 61DM2000 Version 2—Owner’s ManualSelecting Encoder ModesThe exact function of each Encoder depends on the selected Layer and E

62 Chapter 3—Operating BasicsDM2000 Version 2—Owner’s ManualAssigning Parameters to the ENCODER MODE Assign ButtonsUp to four parameters can be assign

Assigning Parameters to the ENCODER MODE Assign Buttons 63DM2000 Version 2—Owner’s ManualAssignable Encoder Mode Parameter List# Parameter Encoder Ope

64 Chapter 4—Analog I/O & the AD Input SectionDM2000 Version 2—Owner’s Manual4 Analog I/O & the AD Input SectionAD Input SectionThe DM2000 fe

Stereo Out 65DM2000 Version 2—Owner’s ManualAD InsertsAD Inputs feature switchable analog inserts with individual balanced 1/4-inch TRS phone jacks fo

66 Chapter 5—Digital I/O & CascadingDM2000 Version 2—Owner’s Manual5 Digital I/O & CascadingWordclocksUnlike analog audio equipment, digital

Wordclocks 67DM2000 Version 2—Owner’s ManualSelecting the Wordclock SourceThe wordclock source can be selected as follows.1 Use the DISPLAY ACCESS [DI

68 Chapter 5—Digital I/O & CascadingDM2000 Version 2—Owner’s ManualTerminating External WordclocksWo rdclock signals distributed via BNC cables mu

2TR Digital Ins 69DM2000 Version 2—Owner’s Manual2TR Digital InsThe DM2000 features three sets of 2-track digital inputs: 2TR IN DIGITAL AES/EBU 1 and

Installing the DM2000 7DM2000 Version 2—Owner’s ManualInstalling the DM2000The DM2000 should be placed on a strong and stable surface, somewhere that

70 Chapter 5—Digital I/O & Cascading DM2000 Version 2—Owner’s Manual Slot I/O The DM2000 features six Slots for installing optional mini-YGDAI (Y

Slot I/O 71DM2000 Version 2—Owner’s ManualInstalling I/O CardsThis section explains how to install I/O Cards.1 Turn off the DM2000.2 Undo the two fixin

72 Chapter 5—Digital I/O & CascadingDM2000 Version 2—Owner’s ManualSetting the Transfer Format for Higher Sampling RatesThe data transfer format f

Dithering Digital Outputs 73 DM2000 Version 2—Owner’s Manual Dithering Digital Outputs For digital audio transfer to lower-resolution systems, the 2T

74 Chapter 5—Digital I/O & CascadingDM2000 Version 2—Owner’s Manual3 If you select the SLOT button for a slot that has an MY16-AE card installed,

Cascading Consoles 75DM2000 Version 2—Owner’s ManualCascade Hookup ExamplesCascading Two DM2000sCascading Three or More DM2000sCascading an 02R Digita

76 Chapter 5—Digital I/O & CascadingDM2000 Version 2—Owner’s ManualAttenuating Cascade InputsCascade Inputs can be attenuated, and the Cascade mod

Input & Output Patching 77DM2000 Version 2—Owner’s Manual6 Input & Output PatchingInput PatchingInput and Output signals for the Input Channe

78 Chapter 6—Input & Output Patching DM2000 Version 2—Owner’s Manual Patching Input Channel Insert Ins AD Inputs, Slot Inputs, internal effects pr

Output Patching 79DM2000 Version 2—Owner’s ManualOutput PatchingSignal sources for the Slot Outputs, Omni Outs, Output Channel Inserts Ins, Direct Out

8 Important Information DM2000 Version 2—Owner’s Manual Monitor •The level of the Surround Monitor can be reset to 85dB SPL. → page 160•A new para

80 Chapter 6—Input & Output PatchingDM2000 Version 2—Owner’s ManualPatching Omni OutsBus Outs, Aux Sends, Matrix Sends, the Stereo Out, Input or O

Output Patching 81DM2000 Version 2—Owner’s ManualPatching Direct OutsDirect Outs can be patched to the Slot Outputs, Omni Outs, or 2TR Digital Outputs

82 Chapter 6—Input & Output PatchingDM2000 Version 2—Owner’s ManualPatching the GEQsThe six 31-band graphic equalizers can be inserted into the Bu

Patch Select Window 83DM2000 Version 2—Owner’s ManualPatch Select WindowInput and Output patches can be made by using the Patch Select window, shown b

84 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s Manual7 Input ChannelsPatching Input ChannelsAD Inputs, Slot Inputs, internal effects processor o

Gating Input Channels 85DM2000 Version 2—Owner’s ManualGating Input ChannelsEach Input Channel features a noise Gate for automatically shutting out un

86 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s ManualGate Edit PageGate settings can be viewed and set on the Gate Edit page. If the Auto DYNAMIC

Attenuating Input Channels 87DM2000 Version 2—Owner’s ManualAttenuating Input ChannelsInput Channels signals can be attenuated pre-EQ. See “Attenuatin

88 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s ManualGrouping Input Channel CompressorsInput Channel Compressors can be grouped, allowing you to

Grouping Input Channel Mutes (ON/OFF) 89DM2000 Version 2—Owner’s ManualGrouping Input Channel Mutes (ON/OFF)Input Channel Mutes can be grouped, allowi

New Functions in DM2000 Version 2 9DM2000 Version 2—Owner’s Manual•The Oscillator can output sine wave signals with different frequencies to the L and

90 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s ManualInput Channel Mute MasterThe DM2000 features a Mute Master function that enables you to mute

Grouping Input Channel Faders 91DM2000 Version 2—Owner’s ManualGrouping Input Channel FadersInput Channel faders can be grouped, allowing you to contr

92 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s ManualGroup Master for Input Channel FadersThe DM2000 features a Fader Group Master function that

Routing Input Channels 93DM2000 Version 2—Owner’s ManualYou can also control the parameters from the channel strips on the control surface as describe

94 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s ManualRouting PagesInput Channel routing settings can be viewed and set on the Routing pages. If t

Panning Input Channels 95DM2000 Version 2—Owner’s ManualPanning Input ChannelsInput Channels can be panned between the left and right channels of the

96 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s ManualPan PagesPan settings can be viewed and set on the Pan pages. If the Auto PAN/SURROUND Displ

Using Surround Pan 97DM2000 Version 2—Owner’s ManualUsing Surround PanThe DM2000 supports 3-1, 5.1 and 6.1 Surround modes. Surround pan is independent

98 Chapter 7—Input ChannelsDM2000 Version 2—Owner’s Manual2 Use the cursor buttons to select the surround mode buttons, and press [ENTER] to activate

Assigning Surround Channels to Buses 99DM2000 Version 2—Owner’s ManualAssigning Surround Channels to BusesYou can modify the Surround Channel to Bus a