Yamaha CLAVINOVA CVP-505 Manual de usuario Pagina 112

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 138
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 111
112 CVP-509/505/503/501 Owner’s Manual
3
CVP-509/505: Keyboard Stand Assembly
3 Attach B and C to A.
1 Align parts B and A so that the protrusion fits into the hole.
2 Fix the bottom surface of the unit using two long screws.
3 Fix the side of the speaker box using two short screws.
If the screw holes do not align, loosen the other screws and adjust
the position of B.
4 Fix C in the same way.
4 Fix E to D using two short screws.
5 Attach D to A.
1 Fix D to the bottom surface of A using two short screws.
If the screw holes do not align, loosen the other screws and adjust
the position of D.
6 Raise A to the standing position.
Use the front legs as support to raise A.
7 Install F.
B
B
A
A
B
Attach the parts, pressing B onto A so that
the two fit tightly together.
A
B
Tighten the screws after
attaching the washers to
the short screws.
DD
EE
CAUTION
• Be careful not to pinch your fingers.
• When you raise the unit, do not hold the key cover.
DD
A
2 Fix the side of the
speaker box using two
short screws.
AA
AA
DD
1 Remove the plastic
cover from D.
FF
2 Untie and straighten out the
bundled cord attached to
the bottom of F.
DD
F
F
3 Pass the pedal cord from
under D to the backside of A.
4 Attach F.
Use three thin screws.
Vista de pagina 111
1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 137 138

Comentarios a estos manuales

Sin comentarios